• GLP JDC1

    The JDC1 contains a traditional single tube element created with LED’s that produce an incredible clear, bright white output. This is then combined with a surrounding full face of RGB power, utilizing a large array of complimentary LED sources. The possibilities are endless as these two elements have independent control and can be used as separate pieces. Or combined for stunning effects. Along with working as a powerful strobe light, both the tube and the full face sections can be run continuously for high output blinder and wash light effects. These will never reduce output or have thermal cutouts. To give even more functionality, the RGB face can be divided into 12 separate ‘pixel’ sections. And the bright white tube can then also be divided into 12 sections and the whole array can be fully pixel mapped through any standard controller. The JDC1 also features dynamic movement with a 16 bit, 185° tilt range, allowing you to place effects exactly where and when you want them to be. While also getting the best possible power and impact. The JDC1 is a whole new class of strobe that offers an incomparable feature set. Going way beyond the definition of a hybrid. The JDC1 is hybrid redefined!

  • Jolt 300

    The Jolt 300 is an innovative multi-use strobe / eye candy fixture. It uses 144 1.5W RGB SMD LED for color strobing and eye candy effects, and 144 .5W white SMD LED located in the center of fixture to create the traditional look of a strobe. Zone chasing control provides an eye candy effect when used together with the white LEDs. The Jolt 300’s massive light output is specifically designed for large stages, nightclubs, live events and touring.

    The Jolt 300 offers users an easy way to navigate the built-in features from a LCD display with a 4-button menu system. The display allows users to change dimming modes, dimming speed, programs, color macros, LED refresh rate, gamma settings and DMX channel modes.

    The rear panel has conveniently located connections with 3-pin and 5-pin DMX along with powercon in and thru. A scissor yoke, and an omega bracket come with the fixture so the it can be attached to a clamp and hung on truss.

  • Elation Protron 3K

    The Protron 3K is a new high powered LED strobe featuring (200) CREE™ 3W Cool White LEDs, 80,000 lumens, 120° beam angle, (2) power modes (HIGH or LOW), strobe effect macros including burst, pulse, lighting, and full ON*, (2) silent cooling fans, electronic dimming, 3/5pin DMX and powerCON in/out connections, (4) button LCD control panel, an integrated rigging yoke, 900W max power consumption, and a multi-voltage universal auto switching power supply (100-240v). *Thermally regulated output at full max 10 seconds.

  • Elation ACL 360 Bar

    ACL 360 BAR is a versatile moving bar effect luminaire featuring (7) individual 15W RGBW 4-in-1 LEDs and the new advanced collimator optic lens, which combined produce a laser-like homogenized 4° color-changing beam from each lens which combined produce a 31° beam angle. Features include fast and precise16-bit continuous full 360° pan and tilt rotation, full individual pixel control, strobe, and selectable dimming curve effects, DMX, RDM (Remote Device Management), KlingNET™ and Art-NET support, 3/5pin XLR, powerCON, and RJ45 ethernet in/out connections, (6) button control full color 180° reversible menu display, 135W max power consumption, and a multi-voltage universal auto switching power supply (100-240v).

  • High End Systems TurboRay

    More than a wash, more than a beam – TurboRay from High End Systems is a unique RGBW Wash/Beam Hybrid fixture. You could say it’s the classic effects light from the future. TurboRay offers a classic retro look with its radial diffusers which brings a distinctive appearance to any lighting rig. TurboRay’s digital breakup pierces the air with twinkling rays of light, while an animation and gobo wheel gives you the power to twist and break up your aerials in new and dynamic ways.

    With its radial diffuser open, TurboRay’s ‘wash diffusion’ homogenizes and softens the light – allowing you to choose between a homogenized face or more radical effects. Used as a punchy narrow-angle washlight or as a powerful hard edge beam that produces beautiful aerial and other effects, the TurboRay fixture is truly versatile.

    TurboRay’s soft edges, homogenized color and smooth intensity fall off make for a spectacular wash. And in the air or projected on a surface, the fixture’s animated gobo wheel and other features produce spectacular textures unseen in any other fixture. With a punchy zoom, pixel LED control, and both split and saturated colors, TurboRay provides limitless looks to bring excitement to the stage. Additional information on this fixture can be found in the documentation tab.

  • Pixel PATT

    The pixelPATT is composed of 7x 40W RGBW LED multi-chips, one in the centre surrounded by a ring of six, housed in a super-slim and lightweight brushed metal frame. Aesthetically it keeps the dimensions and attractive curvature of the PATT 2013 and the picklePATT, and this will also make it desirable for its physical appearance as well as for a light source. In order to make the pixelPATT elegant and a lightweight design, it has a remote Power and Data box PATT Driver, which is connected with the pixelPATT through an industry standard colour scroller cable with 4-pin XLR connectors. For easy installation the pixelPATT can be connected or disconnected from the PATT Driver under power.

  • Altman Spectra Cube UV

    The Spectra Cube UV is a 50 Watt wash luminaire utilizing UV 385 nm LEDs. Designed for theatrical and architectural applications, the power supply is convection cooled without the use of fans to provide silent, long term, high output performance.

  • MagmaticFX Prisma Par 50

    PRISMA PAR 50 is an exterior IP65 rated UV wash par luminaire that produces 365nm peak true UV output with zero visible light, and an impressive 50 degree wide beam angle from the large internal LED reflector. Features includes a user friendly digital 2.5 inch LCD touch screen control panel, intuitive DMX-512 and RDM control, dual adjustable mounting yokes, a durable aluminum housing, and IP65 DMX 5pin XLR and locking power in/out connections.

  • SceneX RGB LED Color Spheres - 20"

    Each sphere has a DMX input and output. And features a number of operating modes for the convenience of a full lighting system. Additionally a stand alone piece where each fixture can run through a series of per-programmed effects. The 20 inch sphere features 3 banks of 3 Watt RGB LED’s. All combining to give seamless color mixing across the full surface of the sphere.

  • AirStar Crystal RGB

    Airstar’s Crystal RGB is our most versatile event lighting balloon. Offering full color output capabilities, it provides specific theming and branding options. This innovative light easily bridges the gap between event lighting and event decor.